Replace any rotting or unstable boards. You may use a wood filler to fill cracks and holes larger than 1/4".
Fill nail holes and cracks up to 1/4", completely fill in with DeckOver® coating using nylon/polyester brush prior to coating. Deep holes and cracks may require additional filling.
Using a 2"-2 1/2" wide brush cut in a 2"-3" wide area around the deck floor where the roller cannot reach. Start at a corner and follow the grain of the wood.
Pour DeckOver coating into a paint tray and work a roller into the tray until it is fully loaded with coating. For best results, use a 1/2" roller cover.
Apply a generous, even coat in the same section as the cut in and roll the coating approximately 4' down the boards.
Reload the roller with coating and continue to the next 4' section. As you go, roll back into the section immediately after the coat is applied. Continue rolling until the first coat is completely applied.
Once the first coat is completely dry, fill in any remaining cracks if necessary and roll out the second coat.
Paint Can Opener
Paint Tray Liner
Roller Cover and Frame