Load A Brush
Use a brush that has water-dampened bristles. Dip the brush into the paint to about one-third of the total length of the bristles.
Dab the brush against the inside of the paint can or the paint tray to remove excess paint. Don't wipe the brush against the rim of the can as the rim will fill with paint, making the opening and closing of the lid messy and difficult.
Repeat this at least twice to make certain the bristles have taken up the proper amount of paint. If the brush is properly loaded, you should be able to move the brush without too many drips.
To apply the paint, position the brush to the painted surface vertically, using the narrow edge of the brush as a guide. Ideally, you want to use the narrow edge as you would a pencil. A brush with an angled sash works best for cut-ins.
Apply paint in a straight line, and move at a pace that would prevent the paint from dripping below the brush. Use enough pressure on the surface to ensure control of your painted line, but don't press hard. The bristles should flex slightly as you paint.
When painting vertically, work from top to bottom. Once the brush starts to stick or skip, which is called "chatter," stop and reload your brush.
To avoid hard edges from paint lines, gently smooth out, or "feather," edges with the brush. Maintain a wet edge when painting a surface.
Load A Roller
When painting with a roller, first remove any lint by lightly pressing painter's tape on the roller cover.
Lightly dampen the roller and remove any excess moisture with a paper towel.
Roll the roller cover into the deep end of the paint tray. Do this several times to cover the entire surface of the roller cover with paint.
Keep in mind that a properly loaded roller should not drip when moved and does not require you to apply force against a surface when painting
Paint Can Opener
Paint Tray Liner
Roller Cover and Frame