Make sure the surface is clean. Wipe up all excess oil and grease spills. Scrape and sweep away dirt and other loose contaminants from the surface.
Clean and degrease the surface using a plastic watering can. This will evenly distribute the product. Work the Degreaser and Cleaner into the surface using a stiff bristled, non-metal brush or broom. Allow the product to remain on the surface for 10-20 minutes then vigorously scrub the surface. DO NOT allow the surface to dry.
Rinse the surface thoroughly with fresh water, while scrubbing at the same time to properly remove remaining residue. Pressure wash for best results.
Remove excess water with a non-metal squeegee or mop. Prevent all rinse solution from entering the storm drains. Once the surface is clean and dry, it can be sealed.
Broom (Stiff Bristle)
Chemical Resistant Gloves
High Pressure Nozzle